How to rig your Shrimp Lights

Home Gear Shopping Cart Shrimping Fishing Info Links

©Copyright 2013 Gator-Tough™ Products, Gator Management Services.™, Nautical Gator, LLC..™ A People Company! All Servicemarks, Trademarks, Slogans, Copyright's, names, photo's, artwork, logo’s and Patents, are the property of our "ShrimpNFish™" Family... All artwork was designed for GatorTough™. And may not be reproduced in any manner whatsoever... for more info on Copyright Servicemarks, Trademarks, and Patent information, click here! [ All Rights Reserved ].

This is how I attached a rope and weight to deploy and hold down our Gator-Tough™ Shrimp Lights...

A 5 - 8 lb weight is needed. Depending upon conditions and current...

It should look like the above diagram when under the water...

This is my personal setup that I use when out Shrimping or Fishing... I use a long line clip to adjust the rope and light height in the water column..

The below photos show how I rig my personal Shrimp Lights!

When on the boat I put them in a tub for deployment and re-deployment. Make it a lot easier.

For Transport I put them in a Dive Bag. I also carry a Spot Light, Weights,, Battery Wrench, and Trolling Motor Plug...

This shows how I attached the 5" Long Line Clip, Rope and Ring. The long line clip is used to adjust the lights depth...

Close-up View. Notice I use a trolling motor Plug with five connectors, I have one for the bow and one for the stern, So I can connect (10) Ten Lights at a time.

Long Line Clips

Making Lead Weights

I made a set of ten new 8lb Shrimping Light Lead Weights, Thought I would share how I made them with you...